W-BEAM

Cold rolled formed section

• 3mm 2.67mm thick HR sheet.
• Fe 410/Fe 360 grade steel conforming to IS 5986 or IS I0748 or equivalent.
• Hot Dip Galvanised - 550 gms/m2 conforming to MORT&H (Ministry of Road Transport & Highways) and IS.

POST/SPACER

Anchored to foundation on Ground & Bridges

• Channel section of 75x150x75x5mm.
• 5mm thick HR sheet.
• Fe 410/Fe 360 grade steel conforming to IS 5986 / IS I0748 / IS 2062 or equivalent.
• Hot Dip Galvanised - 550 gms/m2 or 610 gms/m2 conforming to MORT&H (Ministry of Road Transport & Highways) and IS.

END SECTION

Anglised, Fish Tail or Tubular End Terminals.

FASTENERS

• Hot dip galvanized or electro galvanised bolts, nuts and washers conforming to IS 1364 and IS 1367 of grade 4.6 MS.
• 16mm dia Button head bolts for W-beam to W-beam to spacer connection.
• 16mm dia Hexagonal head type bolts for spacer to post connection.

Application :

• Highways, Flyovers and Bridges.
• High Embankments/Sharp Curves.
• High Density fast moving traffic areas in cities.
• Median barriers as road separators.
• Protection from trees, rocky areas etc.
• Hilly terrain, Ghats, curves, high embankments.
• Test tracks in automobile industry, factories, and mines.
• Mass housing complex, townships.
• Airports, Railway stations and parking places.